Changes between Version 5 and Version 6 of Maschinen/CncFräse/JogBox


Ignore:
Timestamp:
Nov 15, 2009, 11:39:16 PM (15 years ago)
Author:
roh
Comment:

--

Legend:

Unmodified
Added
Removed
Modified
  • Maschinen/CncFräse/JogBox

    v5 v6  
    55=== Hardware ===
    66
    7  [[Image(blog:jogbox:jogbox.jpg)]]
     7 [[Image(blog:jogbox:jogbox.jpg)]] [[Image(jogbox_open.jpg, 500px)]]
    88
    99==== Schematic ====
     
    1111 as pullups anything between 10k and 100k should be working. i used 47k
    1212
    13  [[Image(jogbox_schem.png, 500px)]]
     13 [[Image(jogbox_schem.png, 500px)]] [[Image(jogbox_pullups.jpg, 500px)]]
    1414
    1515 the resistors can be soldered directly to the encoders after mounting these with a center-lock ring in the plastic case.
    1616
    17  to make sure no fluids enter the case and strain-relief the cable mount use a proper cable fitting as shown in the first picture.
     17 my encoders also have a pushbutton feature, but i did not wire these. (see the not soldered pins)
     18
     19 to make sure no fluids enter the case and strain-relief the cable mount use a proper cable fitting as shown in the pictures.
    1820
    1921